Descargar Imprimir esta página

Technical Data - Uline H-9983 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

RESET TO ZERO WEIGHT
If nothing is on the scale, and it does not read zero
weight, press the ON/TARE/OFF button to reset the scale
back to zero weight.
ATTENTION! The scale will tare any amount of
weight. Once the total weight on the scale
reaches the maximum capacity of 11 lbs., the
overload warning code "EEEE" will display.
• Use and store the scale at room temperature.
• Use on a flat, level and stable surface.
• Do not submit the scale to shaking, excessive
vibration or other rough treatment.
• Display may be affected by electromagnetic
disturbances such as radios, microwaves or cell
phones. If such disturbances occur, remove the
source of the disturbance, and restart the scale.
• Disassembling or tampering with the scale voids
the warranty.
• Clean the scale with dish soap and a damp cloth.
IMPORTANT! Scale is not waterproof. Do not
submerge in liquid.
PAGE 2 OF 6
OPERATION CONTINUED
MAINTENANCE

TECHNICAL DATA

Capacity
11 lbs. / 5,000 g
Graduation
0.1 oz / 1 g
Weighing Modes
lb, lb:oz, g
Platform Dimensions
5.5" Round
Scale Dimensions
8.5 x 6 x 1.5"
Weight
0.33 lb.
Power
Two AA batteries
1-800-295-5510
uline.com
INDIVIDUAL WEIGHT OF MULTIPLE ITEMS IN ONE
CONTAINER
1.
Press ON/TARE/OFF to reset the scale back to zero
weight.
2. Add additional item(s) to be weighed.
3. Repeat steps 1-2 for each additional item.
WARNING MESSAGES
Overload warning
EEEE
(Maximum capacity of scale
has been exceeded)
Load cell is damaged or
Out2
needs recalibration
Low Battery
Low battery
0522 IH-9983

Publicidad

loading