Vicks EasyCare+ Top Fill VUL585 Serie Manual De Uso Y Cuidado página 6

Operating Humidifier
1. Plug Adapter Cord into the port on the back of the unit.
With the Power Knob in the off position, plug humidifier
into a polarized 120V outlet.
CAUTION: TO AVOID ELECTRIC SHOCK DO NOT
PLUG HUMIDIFIER INTO OUTLET WITH WET HANDS.
2. Output: Turn the Power Knob clockwise to highest
setting. It is recommended you set the output to high
until you reach a comfortable humidity level.
3. Position humidifier to direct mist output away from
walls, furniture and bedding.
4. Humidity Level: When a comfortable humidity level
is reached, turn Power Knob to a lower setting. A
comfortable humidity level is between 40–60%.
To monitor your humidity level, use a humidity monitor
such as the Vicks V70 (not included)
If you notice condensation on the walls, windows or around unit, your humidity level is too
high. Turn humidifier off.
Using Vicks Vapo Steam or
Your Own Essential Oils
This humidifier features a Medicine Cup that can be used with your favorite
essential oil or liquid inhalant (like Vicks VapoSteam) for added enjoyment.
The cup is heated to help evaporate the oil. This is not a diffuser – the oil does
not meet the water but is passively evaporated into the air. Essential oil and
inhalant are not included.
1. Turn off the humidifier.
2. Add 1 Tablespoon Vicks VapoSteam or a few
drops of essential oil to the Medicine Cup. Turn
on the humidifier.
3. To clean the Medicine Cup wait 5 minutes after
turning the unit off. Then gently wipe residue
from the cup with a soft cloth.
WARNING: DO NOT ADD ESSENTIAL OILS, LIQUID INHALANTS OR ANY
ADDITIVES TO THE WATER. DOING SO CAN DAMAGE THE HUMIDIFIER AND
VOID THE WARRANTY.
6
Step 1
Step 2
(Not Included)
Step 2
1 Tbsp
Step 3
Step 4
Liquid Inhalant
Step 3