Acqua Brevetti PuliMATIC FT366 Instrucciones De Instalacion Y Uso página 38

The control panel (code 23022030) allows directly controlling up to two 24 Vac powered devices
(EVC solenoid valves, relay for pumps, alarms, etc.).
The panel has a specific input for the voltage-free contact with which PuliMATIC is equipped. The
connected devices are controlled by the panel when the voltage-free contact signal of the
PuliMATIC filter is received (washing stage). At the end of the washing procedure, a signal is sent
to switch off/close the devices connected to the panel.
A1.15 Other connections (optional)
PuliMATIC has two outputs for managing auxiliary equipment (e.g. solenoid valves,
alarms ...) and an input for the pressure differential switch to be connected as follows:
Remove the rear cover by using a screwdriver, inserting it in the 2 slots, and proceed as shown in
the following figure:
under such cover there are four electrical connections:
PuliMATIC - ENGLISH
MAN141 PAGE E-11