TRAPP JK-500 Manual De Instrucciones página 30

3 - Personal safety.
✔ Beware with what is going on and use
common sense when operating the
equipment. Do not use it when you are
tired, distracted or under the influence of
drugs, alcohol or medicine. A slight
distraction may result in a serious injury.
✔ Wear protection equipment. Always wear
goggles. Wearing protection equipment like
gloves, shoes, and ear plugs increases your
protection and reduces the risk of an
accident.
Wear proper clothes. Wear neither loose
✔
clothes nor jewelry.
✔ Take precautions against accidental
running. Make sure the switch is set to "off"
before plugging the equipment in. Failure to
do so may cause a serious accident.
✔ Remove all objects before turning on the
equipment. A tool or any other object stuck
in the movable parts of the equipment may
result in an injury.
4 - Use and care.
Do not overuse the equipment. Use it in the
✔
right way and for the purposes described in
this manual for better performance and
safety while working.
Do not use the equipment if the switch
✔
does not turn on/off. The equipment can
not be controlled if the on/off switch is
damaged. A defective switch shall be
immediately repaired.
✔ Switch off the circuit breaker, remove the
fuses or unplug the equipment before
servicing, substituting the cutting blades
and accessories. These safety preventive
measures reduce the risk of accidental
operation of the equipment.
✔ Do not allow people that are not
familiarized with the equipment to use it.
The equipment may become dangerous in
the hands of people not familiar with its
operation.
28
✔ Preserve your equipment. Frequently check
if the movable parts are fixed, if any
component is damaged or check for any
other condition that may affect its optimum
operation. Shall any problem arise, fix it
before using the equipment. Many accidents
are caused by lack of proper maintenance.
✔ Maintain the cutting blades sharp and clean.
The cutting disc will remain in motion after
✔
the machinery has been turned off.
Therefore, pay attention to this when doing
any type of maintenance.
Use the equipment and accessories
✔
according to the instructions in this
manual. Take in consideration the working
conditions and the service to be done.
Using the equipment for operations not
covered in this manual may result in
dangerous situations.
Note:
According to the Brazilian standard NBR
5410, it is compulsory to install a device to
protect against residual differential current
(DR device) in the electrical installation of
your residence. The function of the "DR" is
to protect the user against serious electrical
shock risk (consult an electrician).
5 - Service.
✔ Call qualified professionals to service the
equipment. Use original parts only.
Always call TRAPP Authorized Service
Technicians. TRAPP is not responsible for
occasional accidents caused by the use of
spare parts that are not original.