Quickly Connect The Charging Station; Quickly Switch Charging Stations; Instruction On Fast Charging - ONEXUS OX1 C Manual Usuario

app operation

QUICKLY CONNECT THE CHARGING STATION

After the process of connecting to the charging station for the first time
is finished, the APP will record the last connected charging station.
When the charging station is turned on again, the APP will automatically
connect to the charging station or you can press the button "CONNECT
CHARGER" to actively connect.
If the charging station is not turned on, it cannot be connected. At this time,
you need to click the "+" in the upper right corner of the page to search for
the charging station and try to connect to other charging station.
QUICKLY SWITCH
CHARGING STATIONS
When multiple charging stations have
been connected, the APP will record the
charging stations that have been
connected. If you need to switch charging
station, you can also click on the charging
station name as shown below, and then
select the charging station from the
drop-down list. The switching process
takes about 5s and the connection will
fail if the charging station is offline.
49

INSTRUCTION ON FAST CHARGING

The following 5 pages respectively in order are prompting to insert the
gun page, waiting to start page, waiting for the car to be ready page,
charging page, and prompting to pull the gun after charging finished.
Instructin on fast charging is as shown to be operated in the following
sequence (from left to right, from top to bottom) to complete one
charging: