System Settings-General Settings-Modify Charger Password Page; System Settings-General Settings-Charger Wi-Fi Settings Page; System Settings-General Settings-Charger Name Page - ONEXUS OX1 C Manual Usuario

app operation
SYSTEM SETTINGS-GENERAL SETTINGS
MODIFY CHARGER PASSWORD PAGE
The charging station communicates
with the mobile phone APP by matching
the charger password which consists of
6 digits, and the initial one is "123456".
When the user uses the charging
station and the APP for the first time,
the password needs to be changed,
otherwise, this charging station may
be operated by other APP installers.
When change the password, you need
to fill in the original old password and
the new password twice, and there will
be prompt if the setting is correct or
incorrect.
If
password after modification, you need
to contact the supplier to solve the
problem.
The supplier will verify the validity of
the user, and issue the password
according to the charging station
number with 16 digits in the "About
charger" provided by the customer,
afterthe password is entered, the charger
password will be restored to the initial
"123456".
58
you forget the communication
SYSTEM SETTINGS-GENERAL SETTINGS
CHARGER WI-FI SETTINGS PAGE
The WIFI module of the charging station does not work when it is used
for the first time, which needs to be connected to the WIFI router, with the
WiFi name and WiFi password included as the setting parameters. First
of all, you should make sure that the phone is connected to the WiFi router,
and the user only needs to enter the password and click OK to complete
the setting. Note that the maximum password length is 16 digits.
SYSTEM SETTINGS-GENERAL
SETTINGS-CHARGER NAME
PAGE
The charger name page displays the station
name, and the default is "EVSEXXXX", whose
rule is: EVSE plus the last 4 digits of the charging
station number. The user can set the byte
station name, which will be synchronized to
the chager's LCD display page. Note that the
station name supports maxium 11 characters,
including spaces and others.
After the modification is successful, the APP
needs to be restarted to search for the
changed name.