Therabody RecoveryAir PRO Manual De Instrucciones página 12

Bluetooth Wireless Technology Information
EN
Bluetooth Compliance
Operating Frequency
Output Power
Operating Range
Network Topology
Operation
Antenna Type
Modulation Type
Data Rate
EMC Manufacturer Declarations
Electromagnetic Compatibility (EMC)
Statement for Home Healthcare Environment
The RecoveryAir PRO system has been evaluated to international standard IEC 60601- 1-2
"General requirements for basic safety and essential performance - Collateral standard:
Electromagnetic compatibility - Requirements and tests".
The Medical Electrical Equipment needs special precautions regarding EMC and needs to
be installed and put into service according to the EMC information provided here within the
accompanying documents.
Portable and mobile RF communication can affect the Medical Electrical Equipment. See below
recommended separation distances between portable and mobile RF communication equipment
and the RecoveryAir PRO system.
Wireless communications equipment such as wireless home network devices, mobile phones,
cordless telephones and their base stations, walkie-talkies can affect this equipment and should
be kept at least a distance d = 3.3 m away from the system.
11
Version 4.2 low energy
2.402–2.480 GHz
0 dBm
3-meter radius (line of sight)
Star - bus
Slave
Integrated chip type antenna
Adaptive Frequency Hopping
Over the air: 1 Mbit/second
Application throughput: 0.27 Mbit/s
Data Latency 6 ms
Data Integrity Adaptive Frequency Hopping
Robustness 24-bit CRC (cyclic redundancy check)
32-bit message integrity check
Quality of Service This device uses Bluetooth smart technology for
wireless communication, which allows for reliable
communication in electrically noisy environments.
If connection is lost, the device will automatically
reconnect in a few seconds.
Bluetooth Profiles Supported GAP, GATT, SM, L2CAP and Integrated Public
Profiles
Authentication and Encryption Supported
Rated Maximum
Output Power of
Transmitter (W)
0.01
0.1
1
10
100
*Note: The distance calculated from 800 MHz to 2.5 GHz
Separation Distance*
according to Frequency
of Transmitter (m)
0.23
0.73
2.3
7.3
23