Important Safety Instructions; General Power Tool Safety Warnings - Skil PED0900 Manual Del Propietário

IMPORTANT SAFETY INSTRUCTIONS

General power tool safety warnings

WARNING
below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE .
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Wear appropriate personal hearing protection during use . Under some conditions and du-
rations of use, noise from this product may contribute to hearing loss.
Avoid Dangerous Environments – Don't use appliances in damp or wet locations.
Don't Use In Rain .
Keep Children Away - All visitors should be kept at a distance away from work area.
Dress Properly - Do not wear loose clothing or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear
protective hair covering to contain long hair.
Use Safety Glasses . Always use face or dust mask if operation is dusty.
Use Right Appliance - Do not use appliance for any job except that for which it is intended.
Don't Force Appliance - It will do the job better and with less likelihood of a risk of injury at
the rate for which it was designed.
Don't Overreach - Keep proper footing and balance at all times.
Stay Alert - Watch what you are doing. Use common sense. Do not operate the edger when
you are tired or while under the influence of alcohol or drugs.
Keep guards in place and in working order .
Keep blades sharp . Replace dull or worn blade; do not attempt to sharpen.
Keep hands and feet away from the cutting area .
Never stand or have any part of your body in line with the path of the edger blade .
Store Idle Appliances Indoors - When not in use, appliances should be stored indoors in a
dry and high or locked-up place with the battery pack removed and out of reach of children .
Maintain Appliance with Care - Keep cutting edge sharp and clean for best performance and
to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Keep
handles dry, clean, and free from oil and grease.
Check Damaged Parts - Before further use of the product, a guard or other part that is dam-
aged should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other condition that may affect its operation. A guard or other part
that is damaged should be properly repaired or replaced by an authorized service center un-
less indicated elsewhere in this manual.
Clear the area to be cut before each use . Remove all objects such as rocks, broken glass,
nails, wire, or string that can be thrown or become entangled in the cutting attachment.
Always hold the edger firmly, with both hands on the handles, while operating . Wrap
your fingers and thumbs around the handles .
Avoid Accidental Starting - Don't carry the edger with your finger on the trigger.
Do not operate the edger in gaseous or explosive atmospheres . Motors in these applianc-
es normally spark, and the sparks might ignite fumes.
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool .
Failure to follow all instructions listed
3