Polini E-P3+ Manual De Uso Y Mantenimiento página 19

in accordance with Annex II Part 1 Section A to Machinery Directive 2006/42/EC
transposed at National level by Legislative Decree January 27
THE MANUFACTURER:
REGISTERED AND OPERATIONAL OFFICE: Via Piave, 30 – 24022 Alzano Lombardo (BG)
That the battery chargers for the E-Bike system Polini E-P3 / E-P3+ / E-P3+ EVO (955.830.002 –
955.830.032 – 955.830.043) are composed of the following components:
It complies with the essential health and safety requirements related to the design and manufacture
of the machinery and of the safety components in accordance with Annex I – Machinery Directive
2006/42/EC transposed at National level by Legislative Decree January 27
THE FOLLOWING HARMONIZED STANDARDS WERE USED FOR THE CORRECT IMPLEMENTATION
OF THE ESSENTIAL HEALTH AND SAFETY REQUIREMENTS OF ANNEX I
Standard
UNI EN55014-1-2017
CEI EN 60335-2-29:2016
THE EUROPEAN DIRECTIVES AND ITALIAN LAWS THAT WERE USED
Law no.80/2016 (Electromagnetic Compatibility)
2014/35/EU Low Voltage directive
2014/30/EU EMC
Name: Denis
Surname: Polini
Address: Via Piave, 30 – 24022 Alzano Lombardo (BG)
Alzano Lombardo (BG),
01/03/2023
EC -
DECLARATION OF CONFORMITY
Polini Motori S.p.A.
DECLARES:
BATTERY CHARGER
MACHINERY DIRECTIVE 2006/42/EC
Description
EMC
Domestic appliances and similar – Safety – Part 2-29: peculiarities of the battery
chargers
Person authorized to compile the Technical File
th , 2010, no.17
, 2010, no. 17
th
AUTHORIZED PERSON
(Signature)
SIGNATORY
(Legal Representitive)