Honeywell Home THM5421R1021 Guia De Instalacion página 5

4.4b After a short delay (up to 20 seconds), check the thermostat to
confirm the connection of each RedLINK accessory.
4.4c Touch DONE at the thermostat after all new RedLINK accessories are
connected.
NOTE: The thermostat stays in listening mode for 15 minutes from when it
was connected to the EIM or RedLINK Zone Panel. The timer is reset every
time a new accessory was added. When done adding RedLINK accessories
press DONE on the thermostat display.
4.5 Finish the initial setup.
Finish the setup by selecting the desired options. Touch DONE after you
select the last option you want to change.
For RedLINK FocusPRO, these settings are in numbers rather than text,
so you will need to use the Installation instructions included with the
thermostat.
The thermostat now displays its Home screen and the thermostat setup is
complete.
RedLINK FocusPRO Home screen not shown in this file.
Done
5