Uline H-9417 Manual De Instrucciones página 2

3. Slide leg latch onto each leg brace. (See Figure 3)
Figure 3
Leg
Latch
4. Slide J-Channel over two leg braces. (See Figure 4)
Figure 4
5. Insert leg braces into J-Channel still connected to
tabletop. (See Figure 5)
Figure 5
J-Channel
6. Replace five screws removed in step 1 using Phillips
screwdriver. (See Figure 6)
Figure 6
PAGE 2 OF 9
ASSEMBLY CONTINUED
7. Open leg braces. (See Figure 7)
Leg
Latch
8. Insert legs into leg braces. (See Figure 8)
9. Remove six screws from one J-Channel on bench
seat using Phillips screwdriver. (See Figure 9)
Figure 7
NOTE: Legs should curve toward center.
NOTE: Tabs should face ends.
Figure 8
Tab
Figure 9
0321 IH-9417