Introduction To Exhaust Hose Installation - NewAir NAC12KWH03 Manual Del Propietário

INTRODUCTION TO EXHAUST HOSE INSTALLATION

Temporary installation
1. Twist both ends of the exhaust hose into the square fixing clip and the flat
fixing clip.
2. Insert the square fixing clip into the openings on the back of the air
conditioner (see Fig.9).
3. Place the other end of the exhaust hose on a nearby windowsill.
Window Slider Kit Installation
The window slider kit included with this appliance can accommodate horizontal
or vertical installation. As shown in Fig.10 and Fig.10a, check the minimum and
maximum size of your window before installation.
1. Install the window kit in the window (Fig.10, Fig.10a);
2. Adjust the length of the window slider kit according to the window width or
height and affix it with the dowel.
3. Insert the window connector hose into the hole in the window kit.
www.newair.com
Fig.9
EN
14