Pedal Installation - KAISDA K3 Manual De Instrucciones

4.3 Adjust the adjusting screw of the disc, so that the disc brake can rotate without
obvious friction.
5. Pedal installation：
5.1 Check the two pedals. The foot with "L" printed on the end of the core shaft
should be installed on the left side of the vehicle (without toothed disc) and
rotate counterclockwise. The foot with "R" is installed on the right side (with
toothed disc) and rotate clockwise, then use the No.15 wrench Tighten the foot
core shaft (pay attention to screw the foot up by hand first and then lock it with
a wrench).
6. Saddle installation
6.1.
Open the package, take out the seat cushion, seat rod, and then install the rear
reflector lamp on the seat rod.
6.2
Insert the seat rod into the frame.
6.3
Adjust the seat position to the height most suitable for your riding position and
tighten the quick disassembly (please make sure the quick disassembly lock is
tight).
4.3
5.1
-5-