Remove The Battery - KAISDA K3 Manual De Instrucciones

7. Adjust angle of brake lever, meter, gear shifter and louder controller
on handle bar, then tighten them with tools.

8. Remove the battery

8.1 First open the folding handle safety buckle.
8.2
Then open the folding device.
8.3
Fold the frame, insert the battery key and turn the key to remove the battery.
8.1
9. Accelerator installation instructions
9.1 First use a + screwdriver to loosen the thumb on the right side of the handlebar
but not remove it, move it to a certain position to the left so that the thumb speed can
be adjusted in a certain position. Picture 1, Picture 2
9.2 Take out the thumb speed control handle, install it on the handlebar, and tighten
it with a hexagonal tool. Picture 3
6.3
8.2
-6-
8.3