Figure 3
Long
Post
Short
Post
Figure 5
Figure 6
PAGE 2 OF 9
ASSEMBLY CONTINUED
2. With long posts and short posts positioned as shown, slide posts through
underside of shelf until shelf slides firmly over supports. (See Figures 3-4)
Figure 4
3. Gently tap shelf down with rubber mallet to secure it. (See Figure 5)
NOTE: Keep casters in locked position to keep unit from rolling
during remainder of assembly.
4. Determine height of the next shelf, snap on shelf supports, then
add and secure shelf. Repeat for remaining shelves. (See Figure 6)
1121 IH-9741