Installation Area - Infiniton WM-D89 Manual De Usuario

INSTALLATION
Installation

Installation area

！
Warning!
• Stability is important to prevent the product from
wandering! Make sure the machine is standing leveled
and stable.
• Make sure that the product does not stand onto the
power cord.
• Make sure to maintain the minimum distances
from the walls as shown in the picture
Before installing the machine, the location characterized as
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
Room temperature is above 0°C
6.
Keep far away from the heat sources such as coal or gas burning appliances.
7.
Unpacking the washing machine
！
Warning!
• Packaging material (e.g. Films, Styrofoam) can
be dangerous for children.
• There is a risk of suffocation ! Keep all
packaging well away from children.
6. Remove the cardboard box and styrofoam packing.
7. Lift the washer and remove the base packaging.Make sure the small triangle
foam (a) is removed with the bottom packaging together. If not, lay the unit down
on the side surface and remove it manually.
8. Remove the tape securing the power supply cord and drain hose.
9. Remove the inlet hose from the drum.
10
w
w
W> 20mm