We recommend that you check and clean the filter regularly, at least two or three
times a year.
1
2
Insert removal tool like slotted screwdriver into the small opening of bottom
baffle, press the bottom baffle downward with much strength and open it.
1. While holding down the release lever on the inner
of the drawer, slide open the drawer and remove
it from the machine.
2.
Open the lids of both compartments, add water
and shake to loosen/remove soap residue.
Repeat until clear.
Clean the cap valves of both compartments with a
3.
soft brush.
4. Clean the drawer components under running
water using a soft brush.
5. Clean the drawer recess within the machine using
a soft brush. Make sure to clean the cap valves to
prevent clogging.
6. Once cleaning is complete, slide the drawer back
into position ensuring it moves freely into its fully
retracted position.
if it fails to perform spin cycles.
1
47
42