Infiniton WM-R10D Manual De Usuario página 54

1 Fix the red marked inlet hose to the hot water tap and to the inlet valve with the red
filter on the rear side of machine.
2 Fix the other inlet hose to the cold water tap and to the inlet valve with the blue
filter on the rear side of the machine.
a) The connections are tightly fixed
b) Do not invert their position (for example: cold fill into hot inlet valve and vice versa).
1 You will need a Y-piece connector. This can be purchased from local hardware or
plumbing supplier.
2 Fix the Y-piece connector to the cold fill tap.
3 Connect the two inlet valves present on the rear part of the machine to the Y-piece
connector using the hoses provided.
Fix the inlet hose to the cold water tap and to the inlet valve on the rear side of
the machine as (Fig. 3 ).
All connections are tightly fixed.
Hot fill
Red inlet valve
Blue inlet
valve
Cold fill
Red inlet valve
Blue inlet
valve
Cold fill
Y- piece
1
52
47
Cold fill
Inlet valve