Basket Removal - Baby Jogger city select 2 Manual Del Usuario

EN
USING SAFETY HARNESS
26 Insert side strap buckle into harness
buckle on both sides.
27 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
28 Press button on crotch buckle to
release.
PLACE THE SEAT ON THE FRAME
29 Align the accessory mounting brackets
with the mounting brackets on the
stroller frame.
30 Insert the seat onto the brackets until it
clicks into place. Ensure that both sides
of the seat are securely fastened into
the frame before use.
NOTE: The seat may be installed either
forward-facing or rear-facing.
REMOVE THE SEAT
31 Press gray tabs on mounting brackets
and pull up.
WARNING: Always remove your child
from the seat before removing the
seat from the frame.
RECLINE THE SEAT
32 Squeeze the seat recline button
located at the top of the seat, behind
the canopy.
33 Pull down to lower the seat and pull up
to raise the seat until it clicks into the
desired position.
HANDLE HEIGHT ADJUSTMENT
34 Squeeze the handle adjustment button
and slide the handle up or down to the
desired length.
ADJUSTABLE FOOTWELL
35 Adjust the angle: Press the adjustment
buttons on the footwell and move it up
or down until it clicks into the desired
position.
36 Adjust the length: press the bottom
buttons on the footwell and slide it in
or out until it clicks into place.
EXTENDABLE BASKET
37 To expand the basket, unzip the back
of the basket.
FOLDING
• Remove your child from the seat.
• The stroller may be folded with or
without the seat attached.
• DO NOT fold product with rear facing
seat.
• For the most compact fold, place seat
in the forward-facing position with seat
back most upright.
• Always recline the seat to its most
upright position and place it in the
forward-facing for the most compact
fold.
38 Pull up on the quick fold handles and
let the frame collapse. Push down on
the stroller frame with your thumb
to make lifting the quick fold handles
easier. Make sure the storage lock lever
clicks into place.

BASKET REMOVAL

39 Unfasten the top snaps of the basket
around the middle support bar of
the frame. Then unfasten the bottom
snaps around the side support bars of
the frame.
40 Unhook the top front plastic
attachment loop from over the metal
knob on the front of the frame. Repeat
for the opposite side.
41 Remove basket by unhooking webbing
loop from the front wheel mount.
Reverse the steps to reattach the basket
to the frame.
REMOVING THE SEAT FABRIC
42 Unsnap the seat fabric from the seat
frame.
43 From the back of the seat, unfasten the
hook-and-loop and slide the strap
through the D-ring.
44 Press the footwell adjustment buttons
and pull out on the footwell to remove
the footwell bar from the seat frame.
Pull the seat fabric out of the channel
in the Footwell bar.
45 Pull the seat fabric out of the channel
in the footwell bar.
46 Remove seat pad.
Reverse the steps to reattach the seat pad
to the seat frame.
14