Control Panel - Oster OS-ICMW08EB Manual De Instrucciones

1) START/PAUSE BUTTON: Plug in power, the machine is in standby mode, and the ice
making indicator light flashes green. Press the START/PAUSE button, the ice making
indicator light is on, and the machine starts to work. After the ice making is completed, the
ice is shedded, and the machine enters the deicing function, and so on.
2.CLEANING FUNCTION: Plug in power, press and hold down the START/PAUSE button
for 2 seconds, the machine will enter the cleaning function, and the cleaning indicator light
will be always on. Do not disconnect the power supply during cleaning. After cleaning, the
machine will automatically enter the standby mode.
3.ADD WATER: water shortage alarm: when the light is on, it means water shortage in the
water tank. You need to add water and press the START/PAUSE button to restart the
machine.
4.ICE FULL: ice full alarm. When the ice reaches the maximum amount of ice storage
container, the "ICE FULL" indicator light is on and the machine stops. At this time, the ice
needs to be poured out. When the ice position is lower than the full sensor position, the
machine will restart automatically.

CONTROL PANEL

START/PAUSE button
ICE MAKING: Ice making indicator
light
CLEAN: Cleaning indicator light
ADD WATER: Water shortage alarm
indicator light
ICE FULL: Ice full alarm indicator light
English - 6