CLEANING AND USE GUIDANCE
1.Clean the inner liner, ice collecting tray, water tank and ice shovel frequently. When
cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and
vinegar to clean the inside and the outside surface of the Ice maker. Rinse thoroughly
before use.
2.Keep ventilation openings in the appliance enclosure, or in the built-in structure, clear
of obstruction. Do not use mechanical devices or other means to accelerate the defrost-
ing process, other than those recommended by the manufacturer.
3.Reuse the machine after being idled for a period of time, it may not be able to pump
enough water up for air blockage. In this case, the water shortage indictor sign is
displayed, just repress START/PAUSE button to restart the ice maker.
4.To ensure the cleanness of ice, please change water for water reservoir at least once
one day. If do not use for a long time, please drain the water out and clean it up.
5.If the compressor does not work due to lack of water, ice full, power failure, etc, it will
delay for 3 minutes to start up after restarted.
6.Always use fresh water before starting ice production either at initial installation or after
a long shut-off period.
7.According to the actual use of the machine, the filter screen in the water tank shall be
regularly cleaned after disassembly to prevent the water inlet from being blocked by
incrustation scale
English - 8