Publicidad
Idiomas disponibles
Idiomas disponibles
- WARNING: Accessible parts will
become hot when in use. To avoid burns
and scalds children should be kept away.
Insert in the fixed wiring a mean for
disconnection from the supply mains
having a contact separation in all poles
that provide full disconnection under
overvoltage category III conditions, in
accordance with the wiring rules. The
plug or omnipolar switch must be easily
reached on the installed equipment.
This appliance is not intended to be used
via an external timer or a remote control
system.
The manufacturers decline any responsi-
bility in the event of non-compliance with
what is described above and the accident
prevention norms not being respected
and followed.
To avoid all risk, if the power cable
becomes damaged, it must only be
replaced by the manufacturer, by an
authorised service centre, or by a
qualified electrician.
OPERATING PRINCIPLE (Fig. 1)
It exploits the electromagnetic properties of most cooking vessels.
The coil (inductor) which produces the electromagnetic field is
operated and controlled by the electronic circuit.
The heat is transmitted to food by the cooking vessel itself.
The cooking process takes place as described below.
- loss of heat is minimum (high efficiency)
- the system stops automatically when the vessel is removed or
even just lifted from the hob
- the electronic circuit guarantees maximum flexibility and fine
adjustments.
(Fig. 1)
1 Vessel
2 Induced current
3 Magnetic field
4 Inductor
5 Electronic circuit
6 Power supply
User's Instructions (Fig. 2)
1 Cooking Zone
2 Child Lock
3 ON / OFF
4 Minus -
5 Plus +
6 Booster (Maximum Power)
7 Timer
Installation
All operations relative to installation (electric connection) should be
carried out by skilled personnel in conformity with the rules in force.
As for the specific instructions see part pertaining to installer.
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show " – ", indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
> Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed, select a
relevant zone select key by pressing "
Selected will stay fully it.
" key (A).The symbol 0.
Publicidad
