Publicidad
Idiomas disponibles
Idiomas disponibles
4. Select the power level by pressing the "
"key(D).
5. The power level will start at 5.Pressing the "+"will count up the
power levels from 5 to 9 in numerical order.Pressing the "-"key will
take the power straight from 9 to 0
> If you don't choose a heat setting within 1 minute, the induction
hob will automatically switch off. You will need to start again at step
1.
> You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
> you have not placed a pan on the correct cooking zone or,
> the pan you're using is not suitable for induction cooking or,
> the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone.
The display will automatically turn off after 1 minutes if no suitable
pan is placed on it.
When you have finished cooking
1. Touching the relevant zone select key (A) that you wish to switch
off.
2. Press the "-"key will desrease the power to "0" level, or press
the "+" and
"-" at the same time, the power level will desrease to 0 straight
away.
3. Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear
when
the surface has cooled down to a safe temperature. It can also be
used
as an energy saving function if you want to heat further pans, use the
hotplate that is still hot.
Safety mode (Child lock)
> You can lock the controls to prevent unintended use (for example
children accidentally turning the cooking zones on).
> When the controls are locked, all the controls except the OFF
control are disabled.
To lock the controls
Touch the key lock control for 3 seconds. The timer indicator will
show "Lo"
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the key lock control for a while
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable
except OFF , you can always turn the hob off with the OFF control
in an emergency, but you shall unlock the hob first in the next
operation.
Using the timer
You can use the timer in two different ways:
> You can use it as a minute minder. In this case, the timer will not
turn any cooking zone off when the set time is up.
"key (E) or "
alternately with the heat setting
> You can set it to turn one cooking zone off after the set time is up.
> You can set the timer for up to 99 minutes.
Using the timer as a minute minder
If you are not selecting any cooking zone
1.Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not selecting any
cooking zone.
2.Touch the Timer key(G) "
flashing and "10" will show in the timer display.
3. Set the time by touching the "-" or "+" control of the timer.
Hint: > Touch the "-" or "+" control of the timer once to decrease or
increase by 1 minute.
> Touch and hold the "-"or "+" control of the timer to decrease or
increase by 10 minutes.
> Touching the "-" and "+" together, the timer is cancelled, and
the timer indicator will turn off.
4. When the time is set, it will begin to count down immediately. The
display will show the remaining time .
5. Buzzer will bips for 30 seconds and the timer indicator will turn off
when the setting time finished.
Setting the timer to turn one or more cooking zones off
If the timer is set on one zone:
1. Select the relevant cooking zone which is working by touching the
zone select key (A).
2. Press the Timer key(G) "
you can set the timer at this point.
3. Using the "+" and "-"buttons, you can realize the setting of timing
from 1 to 99 minutes.
Hint: Touch the "-" or "+" control of the timer once will decrease or
increase by 1 minute.
Touch and hold the "-" or "+"control of the timer will decrease or
increase by 10 minutes.
Touching the "-" and "+" together, the timer is cancelled, and the
timer indicator will turn off.
4. When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
5. When cooking timer expires, the corresponding cooking zone will
be switch off automatically.
Other cooking zone will keep operating if they are turned on
previously.
Automatic switch-OFF
When the control is ON it automatically sw itches-OFF after
60 seconds if no cooking zone or select key has been operated within
this period of time. If case of a cooking zone selection, the automatic
switch- OFF time is composed of 60 seconds deselection time for a
cooking zone at setting"0" and 60 seconds switch-OFF time.
Residual heat indicator
It is meant to indicate to the user that the glass ceramic has a
dangerous touch temperature in the circumference of a cooking
zone. The temperature will be determined following a mathematical
model and the remaining residual heat will be indicated by means of
"H" on the corresponding 7-segment display.
Heating-up and cooling down will be calculated dependent on:
· the selected setting („0" to „9")
· the ON/OFF time.
". The minder indicator will start
", the timing indicator flashes, and
Publicidad
