Safety Instructions; General Safety - Waeco CoolFreeze FR-145DC Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
_fr-145.book Seite 18 Montag, 14. August 2006 4:03 16

Safety instructions

2 1, page 3: This refers to an element in an illustration. In this case,
item 1 in figure 2 on page 3.
Please observe the following safety instructions.
2
Safety instructions
Caution!
WAECO International will not be held liable for claims for damage
resulting from the following:
– Damage to the device resulting from mechanical influences and
overvoltage
– Alterations to the device made without the explicit permission of
WAECO International
– Use for purposes other than those described in the operating
manual
2.1

General safety

Have a trained technician make installations in wet rooms.
Do not operate the device if it is visibly damaged.
This device may only be repaired by qualified personnel.
Inadequate repairs can lead to considerable hazards.
Should your device need to be repaired, please contact
WAECO customer services.
Do not open the refrigerant circuit under any circumstances.
Set up the device in a dry location where it is protected against
splashing water.
Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
Ensure that the ventilation slots are not covered.
The device is not suitable for storing caustic materials or
materials containing solvents!
Before starting up the device for the first time, check if the
operating voltage matches the battery voltage (see type plate).
Danger of fatal injuries!
When using the device on boats: if the device is powered by
the mains, ensure that the power supply has a residual current
circuit breaker!
18
FR-145

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Coolfreeze fr-145ac/dc

Tabla de contenido