WERKU WK500480 Instrucciones Originales página 3

ENG
STORE PNEUMATIC TOOLS.
Store pneumatic tools out of reach of children
►
and not allow the handling of pneumatic tools
to people unfamiliar with the tools or these
instructions Pneumatic tools are dangerous in
►
the hands of untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions
that may affect the operation of pneumatic tools
Pneumatic tools are repaired before use when
►
they are damaged
►
by poorly maintained pneumatic tools
pneumatic tools, accessories and tool tips, etc.
according to these instructions and in the manner
provided for the particular type of pneumatic tool,
taking into account the conditions work and work
to develop The use of the pneumatic tool for
►
applications other than those intended could result
in a dangerous situation
pneumatic tool serviced by a Werku
service using only identical replacement parts
This will ensure the safety of the pneumatic tool
►
is maintained.
CHECK THE GOOD CONDITION OF THE PAINT
SPRAY GUN.
Make sure that all the screws in the paint spray
►
gun are perfectly tightened
when the paint spray gun has not been used for
a period, allow the paint spray gun to warm up by
leaving it to run empty for a few minutes, to ensure
that all internal components are perfectly lubricated
Make sure that the possible installed accessories
►
are perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the suction paint spray gun is
►
firmly supported before using
is standing beneath you when using the suction
paint spray gun in high areas
away from all moving parts of the suction paint
spray gun.
DURING THE OPERATION.
Do not leave the suction paint spray gun
►
operating without having it firmly fixed
it on when you are sure you have full control over
it Do not point the suction paint spray gun at
►
Many accidents are caused
Use
►
Please check your
►
official repair
®
In cold climates or
►
Check that no one
►
Keep your hands
►
Only turn
►
anyone while in use
paint spray gun will produce vibrations
screws may gradually come loose, and possibly
cause faults or accidents
from all moving parts of the suction paint spray gun.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the suction paint spray gun after use
be hot and cause burns
with may contain chemicals or toxic components
Avoid inhaling these substances or allowing
►
them to come into contact with your skin
PPE designed to prevent and protect against
incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The paint spray gun has been designed to carry
►
out jobs of painting with compressed air
this plan to familiarize yourself with the paint spray
gun before use.
1
2
6
1. Spray direction control.
2. Trigger.
3. Air pressure control.
4. Spray control.
5. Nozzle regulator.
6. Cup.
USE INSTRUCTIONS .
Before putting the paint spray gun into operation,
►
it is advisable to read all the indicated instructions
Likewise, accident prevention rules, regulations
►
and guidelines for work centres and current laws and
restrictions must be taken into account
spray gun must be used only by personnel who have
been trained adequately in their handling, and only
for the uses for which it has been designed.
3
English
When operating the suction
►
The
►
Keep your hands away
►
►
Some materials worked
►
►
►
The paint
►
It may
Use
Refer
4
5
3