Tripp-Lite U442-DOCK8-BINT Manual Del Propietário página 17

Installation
Non-Video Port Installation
Note: Be sure the power adapter is properly connected and the power
button of the unit is turned on. This should occur once all your devices
are properly plugged in.
• Connect up to 3 USB-A peripherals including speeds up to
10 Gbps. The dedicated charging port supports up to 5V
1.5A (7.5W) of charging power.
• Connect an Ethernet network through the RJ45 port to
achieve speeds up to 10/100/1000 Mbps (1 Gbps).
• Connect the 3.5 mm Mini Stereo port to a headset,
microphone or speaker. If the audio is not automatically
changed to USB Audio Device, open the control panel and
select the hardware and sound icon. Then click Sound >
Manage Audio Devices and select USB Audio Device.
• Transfer data up to 10 Gbps using the USB-C data port.
• (Optional) If you have a security-cable chain lock, connect it
to the anti-theft lock port.
17