Troubleshooting - Moulinex cookeo touch mini Manual De Instrucciones

If any of the safety systems
are activated:
• unplug the cookeo touch mini,
• allow the cookeo touch mini
to cool completely,
• open the cookeo touch mini,
• check and clean:
- the safety valve,
- the ball,
- the covering.
If your cookeo touch mini is still
leaking or not working, take it to an
Approved Service Centre.
An Approved Service Centre
is a repair centre
that has been approved by
Moulinex.
54
Regulating the cookeo touch mini:
When pressure cooking,
the cookeo touch mini
can emit small amounts
of steam. This serves to
automatically regulate
the pressure.
The cookeo touch mini lid:
The metal lid
should only be used
with the cookeo touch
mini. The metal lid should not
be used with other equipment.

Troubleshooting

You may encounter various problems when using the cookeo touch mini.
The lid does not close:
• There may be something stuck
between the bowl and the hot plate.
Remove the bowl to check
that all parts are clean:
- the heating plate,
- the central element,
- under the bowl.
Also check
that the central element
can move around.
• The lid release handle
is not in the correct position.
Ensure that the release handle
is fully open.
• The metal lid is not installed
correctly.
Ensure that all elements
of the metal lid
are in the correct position.
• The bowl damaged
after being hit or dropped.
The bowl should be replaced
at an Approved Service Centre.
55 55