Troubleshooting - Moulinex Cookeo Touch Manual Del Usuario

If any of the safety systems
are activated:
• unplug the cookeo touch,
• allow the cookeo touch
to cool completely,
• open the cookeo touch,
• check and clean:
- the safety valve,
- the ball,
- the covering.
If your cookeo touch is still leaking
or not working, take it to an Approved
Service Centre.
An Approved Service Centre
is a repair centre
that has been approved by
Moulinex.
54
Regulating the cookeo touch:
When pressure cooking,
the cookeo touch can
emit small amounts
of steam. This serves to
automatically
regulate the pressure.
The cookeo touch lid:
The metal lid
should only be used
with the cookeo touch.
The metal lid should not
be used with other equipment.
The cookeo touch lid
is easy to recognise
thanks to the red
safety valve.

Troubleshooting

You may encounter various problems when using the cookeo touch.
The lid does not close:
• There may be something stuck
between the bowl and the hot plate.
Remove the bowl to check
that all parts are clean:
- the heating plate,
- the central element,
- under the bowl.
Also check
that the central element
can move around.
• The lid release handle
is not in the correct position.
Ensure that the release handle
is fully open.
• The metal lid is not installed
correctly.
Ensure that all elements
of the metal lid
are in the correct position.
• The bowl damaged
after being hit or dropped.
The bowl should be replaced
at an Approved Service Centre.
55 55