Front Door - Kenmore PG-40409S0LB-COSG Manual De Uso Y Cuidado

Front Door

3
 Remove the (4) M5x15 screws pre-assembled to the door handle ends, and use them to attach handles
to doors. See A
 Insert the pin at the bottom of each door into the hole on the bottom panel. Insert the pin at the top of
each door through the hole in the door bracket hinge. See B
IMPORTANT: If the doors do not line up when closed or do not close freely, the hinges may need to be
adjusted. Loosen the hinge screws, adjust the hinge position as necessary, and retighten screws.
B
A
21
Hinge Screws