Vorwerk VC100 Manual De Usuario página 46

18
All manuals and user guides at all-guides.com
Troubleshooting
Fault Possible causes and rectification
After connecting •
the table vacuum
to the charging unit
or mains charger
solo, the charging
process does not
•
begin (no pulsating
function indicator).
The function •
indicator flashes
quickly.
•
The Tabletop vacuum The nozzle may be blocked.
cleaner does not
•
vacuum at all or not
as good as it used
The dust chamber may not be correctly
to, and/it makes
inserted in the Tabletop vacuum cleaner.
abnormal sounds.
•
The dust chamber may be full.
•
Dust leaks from The dust chamber may not be correctly inserted in the device.
the device.
•
The filter unit may not have been correctly
inserted in the dust chamber.
•
Ensure that the mains charger with charging unit
and the Tabletop vacuum cleaner are connected
and that the mains socket works (the function
indicator on the handle pulsates and indicates that
the Tabletop vacuum cleaner is being charged).
Ensure that the Tabletop vacuum cleaner
is switched off for recharging.
The Tabletop vacuum cleaner is in safety mode;
this may be due to the battery being too hot.
Disconnect the mains charger of the Tabletop vacuum cleaner
from the mains socket and let the Tabletop vacuum cleaner
cool down.
If the problem persists, please contact
Vorwerk's customer service department.
Switch the Tabletop vacuum cleaner
off and unblock the nozzle.
Insert the dust chamber into the Tabletop
vacuum cleaner properly.
Empty the dust chamber.
Insert the dust chamber into the Tabletop
vacuum cleaner properly.
Insert the filter unit in the dust chamber correctly.