Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories, when
replacing line, or prior to cleaning. An accidental
start‑up can cause injury.
WARNING: Shock hazard. Under no circumstances
should this product be used near water.
WARNING: To reduce the risk of injury, turn off
and remove battery from tool or disconnect plug
from power source before making any adjustments
or removing or installing attachments or accessories.
Remove any accessory from the attachment before
removing or installing the attachment.
General Use of Nozzles
•
Small Nozzle
6
: beachballs, rafts, and other inflatables
with a small valve.
•
Medium Nozzle
7
: small inflatable pools
•
Large Nozzle
8
: air mattresses
Inflating (Fig. B, C)
•
Attach a nozzle (
6
,
7
shown in Fig. A, B
•
Insert the inflator port into the inflatable.
•
To switch the tool on, press the variable‑speed switch on
the Power Unit. The tool speed depends on how far you
press the switch.
•
To switch the tool off, release the variable‑speed switch.
nOTE: This attachment only operates in the forward
direction, the forward/reverse slider of the Power Unit should
not be able to be switched to reverse.
nOTE: Operate your inflator only with the nozzles included.
nOTE: Many inflatables, especially air mattresses, have an
internal flap that prevents air loss during inflation. Unless this
flap is displaced by the nozzle, the mattress will not inflate.
Push the nozzle firmly into the valve to ensure that you push
this flap out of the way.
Deflating (Fig. D, E)
•
Attach a nozzle (
6
,
7
delfator port
3
as shown in Fig. D
•
Insert the nozzle into the inflatable as shown in Fig. E.
•
To switch the tool on, press the variable‑speed switch on
the Power Unit. The tool speed depends on how far you
press the switch.
•
To switch the tool off, release the variable‑speed switch.
Positioning (Fig. F)
The inflator port
2
can be positioned in
10 different orientations.
•
Turn the inflator head
position and into the next. Continue rotating until the
inflator port is in the desired location.
•
4
,
8
) to the inflator port
2
,
8
) by pushing the nozzle into the
5
until it clicks out of its current
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories, when
replacing line, or prior to cleaning. An accidental
start‑up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Cleaning
WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
WARNING: Since accessories, other than those
offered by BLACK+DECKER, have not been tested with
this product, use of such accessories with this tool
as
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact BLACK+DECKER call 1‑800‑544‑6986.
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a BLACK+DECKER factory service
center or a BLACK+DECKER authorized service center.
Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
• Register online at www.BlackandDecker.com/
NewOwner
Publicidad
Tabla de contenido
