USE & OPERATION (CONTINUED)
REMOTE CONTROL
NOTE:
•
The remote control requires AAA (2 x 1.5V) batteries for replacement.
•
Open the battery compartment at the back of the remote control and insert the batteries
inside.Care must be taken to insert the batteries according to the correct polarity (+ / –)
markingsshown inside the battery compartment.
•
Always point the remote control signal transmitter towards the unit when operating. Make sure
that the signal path is not obstructed.
•
Remove the batteries if the unit is not going to be used for an extended period of time.
•
Do not drop the remote control.
•
Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
•
Do not mix old and new batteries.
•
Do not recharge the battery.
•
Exhausted batteries are to be removed from the product and safely disposed of as per local
regulations.
•
Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING: Caution for ingestion of the small battery. Keep away from children and animals.
POWER
:
ON / OFF
SPEED
:
Low / High
COOL
:
Controls cooling or fan option
SWING
:
Controls the motion of the louvers
TIMER
:
Controls the Timer function for automatic off
EN
3