Control Panel - cecotec BOLERO AGUAZERO 6400 Manual De Instrucciones

ENGLISH
programme in terms of combined energy and water consumption and is used to assess
compliance with EU eco-design legislation.
- Washing dishes in a household dishwasher generally consumes less energy and water
than manual dishwashing when the dishwasher is used according to the manufacturer's
instructions.
- It is recommended that you leave the door slightly open after the washing cycle has
finished to speed up drying.
- You can access the product database where the information for this model is stored by
scanning the QR code on the energy label.
Bolero Aguazero 6400 Bolero Aguazero 6000 Inox
dishwasher dishwasher

7. CONTROL PANEL

Fig. 16
1. Power button
2. Programme selection button
2.1. Programme indicators
3. Delay start button
3.1. Delay start indicator
4. Remaining time indicator
5. Start/Pause button
6. Option button
7. Selection button
8. Salt indicator
9. Rinse aid indicator
10. Tablet indicator
11. Extra hygiene indicator
12. Medium load indicators
13. Energy save indicator
14. Extra speed indicator
15. Extra silence indicator
16. Programme phases indicators
Washing phase indicator
a.
Rinse phase indicator
b.
72
Bolero Aguazero 6400 Dark
dishwasher
Dry phase indicator
c.
Final phase indicator
d.
1. Power button
Press this button to turn the dishwasher on and off.
2. Programme selection button
Use this button to choose a programme. The programme indicator for the selected
-
programme will light up (2.1).
To obtain more details about the programmes, check the "Programmes table" section.
-
3. Delay start button
Use this button to delay the start hour of a programme between 1-2 and 24 hours, before
-
running it. The delay start indicator will light up (3.1).
If you wish to change the delay start time, first press the Start/Pause button and, next,
-
the delay start button to select a new delay start time. To activate the new delay start
time, press the Start/Pause button.
To cancel the delay start, you must select 0 hours with the delay start button.
-
4. Remaining time indicator
This indicator will help you control the programme status through the washing, rinse, dry, final
and remaining time indicators.
5. Start/Pause button
Press the Start/Pause button to start or pause the programme. The washing indicator will
-
light up and the remaining time indicator will show the programme length.
It will also show the remaining time during the programme running.
-
If you open the machine door will the programme is running, the programme length will
-
stop and the corresponding programme phase indicator will start flashing.
6. Option button
You can select options by pressing the option button repeatedly.
-
A flashing LED will show the selected option.
-
7. Selection button
Confirm the option by pressing the selection button.
-
The LED of the selected option will light up and will be steady.
-
8. Salt indicator
If there is enough salt, the salt indicator will light up to warn you that you must refill the
-
salt compartment.
ENGLISH
73
AGUAZERO 6400 / 6400 INOX / 6400 DARK