How To Ride - Vermeiren 2217E Manual De Instrucciones

8. How to ride

Before using the tricycle in busy or potentially dangerous areas or roads with heavy traffic,
familiarize yourself with the operation of your tricycle. Please practice in a wide and open area
like a park. Try out the different assistance levels.
When the assist system is turned ON, the electric system engages and will provide assistance
only while pedaling. The amount of power depends on your pedaling force and the assistance
level. When you stop pedaling or reach a speed more than 17 km/h the assistance is switched off
automatically. When the assistance is switched off (assistance level: 0), you can ride normally
with your tricycle.
8.1.1 Operator control interface
4
1
2
3
8.1.2 ON/OFF
Press the on/off button (1) to switch the system on/off. When the tricycle stops and the system is
not used for 5 minutes, the assist system switches off by itself.
8.1.3 Choosing the power assist level
Press the MODE button (2) to select the desired power assist level (1 = lowest, 3 = highest).
When switching on the control system, the meter will automatically restore the power assist level
to "low".
8.1.4 Power-assisted start function
When the pedals are in an uncomfortable position to start cycling, an assisting start function is
available in which the tricycle drives at a speed of max. 6 km/h.
Press and hold the power-assisted start button (4) to activate the assisting start function. The
tricycle will drive until you let go of the button.
9. Keys
Your E-tricycle is delivered with 2 keys: main key and spare key. The keys are identified by a
serial number. Keep the spare key in a safe place and write the key serial number down for key
replacement.
10.Maintenance
For the maintenance manual of the tricycles refer to the Vermeiren website: www.vermeiren.com.
5
3
1. ON/OFF button
2. MODE button
3. Power assist level indicator
4. Power-assisted start function
5. Battery level indicator
EN
2217E, 2219E
2022-08
NL