Extended-Reach Hedge Trimmer Safety Warnings; Additional Safety Warnings - VONROC HT503DC Traducción Del Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
EN
Liquid ejected from the battery may cause
irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modifi ed. Damaged or modifi ed
batteries may exhibit unpredictable behaviour
resulting in fi re, explosion or risk of injury.
f) Do not expose a battery pack or tool to fi re
or excessive temperature. Exposure to fi re or
temperature above 130 °C may cause explosion.
NOTE The temperature „130 °C" can be replaced
by the temperature „265 °F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specifi ed in the instructions.
Charging improperly or at temperatures outside
the specifi ed range may damage the battery and
increase the risk of fi re.
6) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
HEDGE TRIMMER SAFETY WARNINGS
a) Keep all parts of the body away from the blade.
Do not remove cut material or hold material
to be cut when blades are moving. Blades
continue to move after the switch is turned off.
A moment of inattention while operating the
hedge trimmer may result in serious personal
injury.
b) Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate
any power switch. Proper carrying of the hedge
trimmer will decrease the risk of inadvertent
starting and resultant personal injury from the
blades.
c) When transporting or storing the hedge trim-
mer, always fi t the blade cover. Proper handling
of the hedge trimmer will decrease the risk of
personal injury from the blades.
d) When clearing jammed material or servicing
the unit, make sure all power switches are off
and the battery pack is removed or disconnect-
ed. Unexpected actuation of the hedge trimmer
while clearing jammed material or servicing
may result in serious personal injury.
8
e) Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring. Blades contacting a "live" wire
may make exposed metal parts of the hedge
trimmer "live" and could give the operator an
electric shock.
f) Keep all power cords and cables away from
cutting area. Power cords or cables may be hid-
den in hedges or bushes and can be accidental-
ly cut by the blade.
g) Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk
of lightning. This decreases the risk of being
struck by lightning.
EXTENDED-REACH HEDGE TRIMMER SAFETY
WARNINGS
a) To reduce the risk of electrocution, never use
the extended-reach hedge trimmer near any
electrical power lines. Contact with or use near
power lines may cause serious injury or electric
shock resulting in death.
b) Always use two hands when operating the
extended-reach hedge trimmer. Hold the ex-
tended-reach hedge trimmer with both hands to
avoid loss of control.
c) Always use head protection when operating the
extended-reach hedge trimmer overhead. Fall-
ing debris can result in serious personal injury.

ADDITIONAL SAFETY WARNINGS

a) This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
b) When working with the machine, always hold it
fi rmly with both hands and provide for a secure
stance. The power tool is guided more secure
with both hands.
c) Always ensure all handles and guards are fi tted
when using the machine. Never attempt to use
an incomplete machine or one fi tted with an
unauthorized modifi cation.
d) Always lubricate the cutting blade with protec-
tive spray before use.
e) Always wait until the machine has come to a
complete stop before placing it down.
WWW.VONROC.COM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

S ht503dcS2 ht503dcS3 ht503dc

Tabla de contenido