Safety Instructions; Explanation Of The Symbols - Batavia BT-CP002 Manual De Usuario

Dear customer
Please familiarize yourself with the proper
usage of the device by reading and follow-
ing each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read all safety instructions!
This manual contains important informa-
tion on operating and handling the device.
Keep these operating instructions for fur-
ther reference. Please pass it on along with
the unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under
art. No: 7064221 (2Ah). The charger is avail-
able separately under art. No: 7064222
(2.4A) or 7064223 (0.4A).
These items are available online and in
participating stores.

1. Explanation of the symbols

The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury,
loss of life or damage to the tool in
case of non-observance of the
instructions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear safety glasses. When
working with electric power tools,
sparks, splinters, chips and dust
particles may be generated and
these can cause loss of sight.
Wear safety gloves!.
Variable speed control.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
Do not dispose of electric power
tools with domestic refuse.
2. Machine specific safety warn-
ings for polishers
• This power tool is intended to function
as a polisher. Read all safety warnings,
in¬structions, illustrations and specifi-
cations provided with this power tool.
Failure to follow all instructions listed
below may result in electric shock, fire
and/or serious injury.
• Operations such as grinding, wire
brushing or cutting-off are not recom-
mended to be performed with this
power tool. Operations for which the
power tool was not designed may cre-
ate a hazard and cause personal injury.
• Do not use accessories which are not
specifically designed and recom-
mended by the tool manufacturer. Just
because the accessory can be attached
to your power tool, it does not assure
safe operation.
• The rated speed of the accessory must
be at least equal to the maximum
speed marked on the power tool.
Accessories running faster than their
rated speed can break and fly apart.
• The outside diameter and the thickness
of your accessory must be within the
capacity rating of your power tool.
Incorrectly sized accessories cannot be
ade¬quately guarded or controlled.
• Threaded mounting of accessories
must match the polisher spindle thread.
For accessories mounted by flanges,
the arbour hole of the accessory must
fit the locating diameter of the flange.
Accessories that do not match the
mounting hardware of the power tool
will run out of balance, vibrate exces-
sively and may cause loss of control.
• Do not use a damaged accessory.
Before each use inspect the accessory
for cracks, tear or excess wear. If power
tool or accessory is dropped, inspect
for damage or install an undamaged
English
5