Unpacking And Assembling The Scooter - Wayscral Kickway L1 Manual De Instrucciones

II.

Unpacking and assembling the scooter

1. Open the box and take out all the parts (do not throw away the
packaging as you will need it if you return the product). Check
that no parts are damaged.
2. Lift the stem: press the rear fender to separate the locking hook
to engage it from its locking loop.
3. Once the stem is lifted, check that it is locked in place by
attempting to fold it. Unfold the kickstand.
4. Using the Allen key provided, loosen the screws on the locking
hook and remove them. After removing the screws and the locking
hook, remove the cover at the top of the stem.
5. Insert the handlebars with the control screen into the stem.
55