Adjustment Run - HomeMatic HmIP-eTRV-CL Instrucciones De Montaje

Start-up
Danfoss RAVL
Danfoss valve bodies have elongated notches around their circumfer-
ence, which also ensure that the adapter is properly seated when it snaps
on.
During installation, please ensure that the pins inside the adapter are
aligned with the notches on the valve.
• Snap the adapter completely onto the valve.
• Place the spigot extension on the valve pin.
The RAVL adapter does not need to be screwed on.
5.3

Adjustment run

When the batteries are inserted, the motor first reverses to facilitate
fitting. While this is happening, "
played (see figure 10).
52
0 6 12
18
Mo Tu We Th Fr Sa Su
AUTO
BOOST
MANU
" and the activity symbol ( ) are dis-
Offset
Prg
24