Configuration Menu - HomeMatic HmIP-eTRV-CL Instrucciones De Montaje

If the adjustment run was initiated prior to mounting, or if an error
message (F1, F2, F3) is displayed, press the system button (D): the
motor will reverse to the "
be restarted.
6
0
Mo Tu We Th Fr Sa Su
AUTO
After the radiator thermostat has been mounted successfully, an adjust-
BOOST
MANU
ment run ( ) must be performed in order to adjust the device to the
valve. To do this, proceed as follows:
Offset
• As soon as "
Prg
the adjustment run (see figure 11).
The radiator thermostat performs the adjustment run, and "
activity symbol ( ) are displayed. During this time, no other operation is
possible. After the adjustment run has been successful, the display re-
turns to normal. The radiator thermostat can now be operated.
6

Configuration menu

If you operate the device without a Homematic IP Access Point, after
commissioning you can use the configuration menu to directly select
the following modes and adjust the settings to adapt the device to your
personal needs:
Press and hold the menu button (D) to enter the configuration
•
menu.
Select the desired symbol using the plus and minus buttons (C +
•
E) and briefly press the menu key to adjust settings for the various
menu items.
Press and hold the menu button to return to the previous level.
The menu automatically closes without applying changes if there is
no operation for more than 1 minute.
0 6
0 6
Mo Tu We Th Fr Sa Su
Mo Tu We Th Fr Sa Su
AUTO
6.1
AUTO
BOOST
BOOST
6.2
MANU
MANU
Offset
Offset
Prg
Prg
0 6 12
Mo Tu We Th Fr Sa Su
AUTO
BOOST
MANU
Offset
12 18 24
Prg
6
0 12 18
Mo Tu We Th Fr Sa Su
AUTO
BOOST
MANU
" is displayed, press the system button (D), to start
Offset
Prg
12
18 24
12
18 24
Automatic mode
Manual operation
18 24
" position. The adjustment run can then
24
Configuration menu
6
0 12 18
Mo Tu We Th Fr Sa Su
AUTO
BOOST
MANU
" and the
Offset
Prg
53
24