Memory E; Recalling Memory; Deleting Memory - A&D Medical UA-651 Manual De Instrucciones Original

Memory
The monitor automatically stores up to 60 blood pressure and pulse
measurements in memory. Data stored in memory are assigned a
data number in the order of the newest to the oldest. The oldest data
displays as "
display indicates that you are viewing previous data stored in memory.

Recalling Memory

1. When nothing is displayed, press and hold the START button to
recall the stored data.
2. Release the button when
displaying the average
data.
3. The data number
and stored data are
automatically displayed
in order from the last
measurement.
4. The display will turn off
automatically after all data
is displayed.
Note: If you press the START button
while recalling data, the monitor turns
off.

Deleting Memory

1. When turning off the monitor,
press and hold the START
button until the "
displayed.
2. Select "
3. Data is cleared when the
mark blinks.
4. The monitor turns off
automatically
E-15
". The M symbol in the upper left corner of the
" is
" to clear data.