About Memory - A&D Medical UA-705 Manual Del Usuario

About Memory

The UA-705 automatically stores up to 30 blood pressure and pulse
measurements in its memory. Measurements stored in memory are
assigned an index number in the order of the newest to the oldest. The
oldest reading displays as "n01".
To retrieve readings, follow these simple steps:
1. When the display screen is blank, press and hold
the START button. While holding down the START
button, you will see the average reading displayed
first. You will then see the memory index number
(e.g. n04) of the most recent reading followed by
the measurement. Release the START button
when you see the memory index number.
2. The display will shut off automatically a few seconds
after all of the readings are displayed. To turn off
the monitor at any time, press the START button.
To clear the measurement history from memory,
remove the battery from the unit and then place the
battery back into the battery holder.
NOTE: If there are no measurements stored in memory, you will see two 0s displayed vertically
followed by a blinking "A00".
NOTE: Stored measurements will be lost if batteries become low or are removed.
E-11