Marcy NS-6002RE Manual De Instrucciones página 9

STEP-3
1. Attach Seat Support Bracket (35) to the Seat (11), secure with two Allen Bolts (30) and
Washers (73).
2. Attach the Slide Rail (26) to the Main Frame, secure with four Allen Bolts (24) and Washers (25)
at the end of the rail. Attach the two Collars (22) on the bottom of the rail with Allen Bolts (23) at
the connection, DO NOT OVER TIGHTEN THE COLLARS.
3. Slide the Seat (11) onto the Slide Rail (26) from the top of the rail.
4. Tighten the two sides with two Collars (22) with Allen Bolts (23) on the top of the rail, DO NOT
OVER TIGHTEN THE COLLARS.
5. Secure two sets of the Allen Bolts (24) and Flat Washers (25) to the front Slide Rail (26).
6. The Rower should be in the Folded position at this point.
26
22
23
24
25
© IMPEX INC.
11
30
73
11
1
22
23
30
73
35
22
23
4X
4X
26
8
22
23
25
www.marcypro.com
2X
2X
1
24