Safety Instructions - cecotec THERMOSENSE 120 Manual De Instrucciones

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
- Do not immerse the cord, plug, or any non-removable part of
the appliance in water or any other liquid. Do not expose the
electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the appliance.
- Never immerse the appliance in water. Do not reach into the
water!
- Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the official Technical
Support Service of Cecotec in order to avoid any type of
danger.
- Do not move the product or pull from it from its cord. Do
not use the cable as handle. Do not push the cord against
corners or sharp edges. Do not pass the product over the
power cord. Keep the cord away from hot surfaces.
- Do not operate the product if its cord, plug or body show
visible damage, do not operate properly or have been
dropped.
- Do not use the appliance in confined spaces with explosive
or flammable vapours.
- Do not leave the appliance unattended while in use.
- Unplug it from the power supply when you finish using it and
before leaving the room.
- Do not try to repair the product by yourself. Contact the
official Technical Support Service of Cecotec.
- Always turn off and unplug the appliance when not in use,
before moving it to a new location and before assembling or
THERMOSENSE 120 7