Indicator Lights - JVD COPT'AIR Manual De Instrucciones

REPLACEMENT PARTS: It is possible to replace the cover, the tank, the filter and filter support by a qualified technician. The rest of the parts must be
replaced by the manufacturer.

INDICATOR LIGHTS /

IV
En
When the product is switched on, the indicators LEDs show that it is working
1
properly. If the lights are off, the appliance is off too.
When operating, the flashing leds appear.
2
Ar
V
CHARACTERISTICS /
En
230V VERSION
-Supply voltage: 220-240 V
-Frequency: 50 Hz
-Nominal power:
600 W (no heating resistor)
1600 W ( with heating resistor)
115V VERSION
-Supply voltage: 110-120 V
-Frequency: 60 Hz
-Nominal power: 1000 W (no heating resistor)
Brush motor
Class II - IP 24 product
Electronic safety device in event of malfunction
Infrared detection system
Noise level: 76 dBA
Toral weight: 4.3 kg -(Aluminum cover)
Made in France
9
‫قطع الغيار: ميكن استبدال الغطاء والخ ز ان واملرشح ودعامة املرشح من ق ِ بل خبري تقني مؤهل. يجب استبدال بقية األج ز اء من ق ِ بل الجهة املصنعة‬
‫املؤ رش ات الضوئية‬
1
2
‫الخصائص‬
N
Ar
O