Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
POWER
Press the
button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
MODE
Press the
button to activate evaporative cooling and/or louver swing modes.
Press the
button until the "S" indicator light is illuminated on the control panel. The Vertical
Louvers will begin to move left to right automatically.
Press the
button until the "C" indicator light is illuminated to activate evaporative cooling. The
water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media is
completely wet.
Pressing the
button until both "S" and "C" are illuminated will activate both Swing (Vertical
Louvers) and Cool modes simultaneously.
Note: When the "C" mode is not selected, the unit functions in a fan only mode, without evaporative
cooling.
SPEED
Press the
button repeatedly to change the speed between High - Medium - Low.
The indicator light will show the selected speed.
TIMER
Press the
button until the desired time duration setting is selected. When the set time has passed,
the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from
electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SWING(H)
Press the
button until the indicator light turns on. This activates the
Horizontal Louvers and they will begin to move up and down automatically.
EN
3
LOUVER
MOVEMENT
Publicidad
Tabla de contenido
Solución de problemas
