Important Warnings - UFESA FLEXY-HEAT EP Manual De Instrucciones

product prior to use if it shows any signs of
moisture.
This device is designed for use at a maximum
altitude up to 2000m above sea level.

IMPORTANT WARNINGS

The mains connection cable must not be tangled or wrapped around the product during
use.
Do not pull on the cable to unplug it or use it to carry the product. Do not wrap the cable
around the control.
Do not cover or lay the control on top of the regulator control during use in order to ensure
its proper operation.
Do not cover the product with any heavy or thick objects and do not place on top of any
other heating elements.
Use without folding.
Do not stick any pins or needles or any other pointy metal objects into the product.
Proceed according to the conservation section of this manual for cleaning.
Do not use the product to warm up animals.
Materials will suffer wear and tear over time and after prolonged use. Unplug the product
immediately from the mains in the event of any breakdown and contact an authorised
Technical support service.
In order to prevent any risk of danger, do not open the remote control or the connection.
Only qualified technical personnel from the brand´s Official Technical support service may
carry out repair or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and
void. Only an authorised technical support service centre may carry out repairs on the
product.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
Prior to connecting the product to the mains, check your power supply voltage to ensure it
is the same as the one indicated on the label included on the product. Connect the product
to the appropriate mains.
In order to turn on the product, you must select the slider switch on the control, setting it
to position 1, 2 or 3 (Fig.1).
15