Troubleshooting Guide - UFESA FLEXY-HEAT EP Manual De Instrucciones

From this time on, the product is operational.
The maximum operation time is 90 minutes, after which the automatic safety shut-down
will immediately activate. The product will no longer heat up when in this state.
To turn on the product again, set it to position "0" and select the desired temperature.
Select the "0" position in order to turn off the product before you disconnect the device
from the mains.

TROUBLESHOOTING GUIDE

Possible operational problems
PROBLEM
The regulator control does not light up when
After a certain operation time, the product
temperature seems to reduce.
PRODUCT DISPOSAL AND CONSERVATION
PRODUCT CONSERVATION
Unplug the product when you do not intend to use
it for an extended period of time to prolong its
shelf-life. Prior to storing the product, allow it to
cool before folding, keep it in its original packaging
in a dry location with the fewest possible folds,
without placing any objects on top.
PRODUCT CLEANING
Unplug and remove the regulator prior to cleaning
the product.
16
RECOMMENDATION
Ensure that the regulator is properly connected
to the pro- duct and that there is voltage in the
socket of the mains used and that the product is
properly plugged in.
The product has an auto-stop system that
activates after 90 minutes of continuous
operation. After this time, the light on the
regulator starts to flash. If you want to continue
to use it, change the temperature level to level 0,
wait a few seconds, and then select the desired
temperature.