Publicidad

Idiomas disponibles

Idiomas disponibles

Model #
443Wa
Tea Table
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • www.whittierwood.com
Fax: 541-687-2060 • www.whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any parts
Rev. 1/07

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Whittier Wood Products 443Wa

  • Página 1 Model # 443Wa Tea Table Service Policy: We will replace any parts Assembly Instructions which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Página 2: Tools Required

    Screws (G). A hanger bolt in the Pedestal has been installed at the factory. Simply thread the hanger bolt onto the Leg Plate and turn the Top (D) clockwise until tight. Do not over tighten. See FIGURE 2. Page 2 — 443Wa (Rev. 1/07)
  • Página 3 Modelo # 443Wa Mesa de Té Normas para obtener servicio: Instrucciones para Armar Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 4: Instrucciones Para Armar

    Simplemente gire el perno sujetador para insertarlo en la Placa del Pedestal y gire el Panel Superior de la Mesa (D) hacia la derecha hasta que esté apretado. No apriete excesiva- mente. Vea la FIGURA 2. PG 2 – 443Wa SP (Rev. 1/07)
  • Página 5 No. de modèle 443Wa Table à Thé Politique de service : Nous remplacerons toutes Instructions de Montage les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 6: Outils Nécessaires

    443W Table à Thé INSTRUCTIONS DE MONTAGE OUTILS NÉCESSAIRES : Maillet en caoutchoue ou marteau, Tournevis Cruciforme, colle à bois. Nomenclature des Pièces Avant de commencer, vérifier si les quantités de pièces reçues correspondent aux quantités indiquées ci-dessous. Pièce Description Qté...

Tabla de contenido