Publicidad

Model #
798W
Tall Bookend
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
Rev. 6/05

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Whittier Wood Products 798W

  • Página 1 Model # 798W Tall Bookend Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Página 2 798W Tall Bookend — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. A – Long Base – Qty. 1 B – Short Base – Qty. 1 E – Shelf – Qty. 5 I –...
  • Página 3: Tools Required

    Veneer parts – apply stain to unexposed portion of lower backs. See FIGURE 2. b) Alder pieces – apply stain to back of bases. See FIGURE 3B. FIG. 1 1. Lay out the wood parts in their approximate locations to aid in the identification and assembly. 798W — Page 3...
  • Página 4 Using #8 x 5/8" Pan Head Screws (K) attach the 90-Degree Bracket (L) to the Long Base (A) as shown in FIGURE 3. Make sure that the 90-Degree Bracket does not cover the mounting holes in the edge of the Long Base (A). Page 4 — 798W...
  • Página 5 Next, glue the Left Upper Back (G) to the shelving assembly. Tap all of the parts together to make sure there is a snug fit. FIG. 5 5. Attach Top Shelf (F) to upper shelf assembly aligning and gluing the wood dowels in place. 798W — Page 5...
  • Página 6 Make sure that the grain in the Shelves is going the direction as shown in the figure above. Next, glue the Left Lower Back (C) to the shelving assembly. Tap all of the parts together to make sure there is a snug fit. Page 6 — 798W...
  • Página 7 See FIGURE 8B. Use #8 x 5/8" Pan Head Screws (K) to attach the 90-Degree Braces (M) in place. Attach the base assembly to bottom shelf by using #8 x 1¼" Pan Head Screws (N) through the six mounting holes in the long and short bases. See FIGURE 8C. 798W — Page 7...
  • Página 8 #8 x 1¼" Pan Head Screws (N) through the pilot holes in the cleats in the Center Shelf (I) into the lower shelf assembly. x 1 Kit 10. When you have determined the location for your unit, install the Furniture Tipping Restraint (P). Carefully follow the instructions contained on the package. Page 8 — 798W...
  • Página 9 Modelo # 798W Librero Lateral Alto Instrucciones para Armar Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 10: Herramientas Necesarias

    90 grados no cubra los orificios de montaje que se encuentran en el borde de la Base Grande (A). • Ocho en el Panel Posterior Superior Izquierdo (G) • Seis en el Panel Posterior Superior Derecho (H) 798W — PAGE 2 SP...
  • Página 11 Después, pegue el Panel Posterior Inferior Izquierdo (C) en el ensamble de estantes. Con un mazo de golpecitos suaves a todas las piezas juntas para asegurarse de que queden apretadas. 798W — PAGE 3 SP...
  • Página 12 No. de modèle 798W Rayonnage Haut Politique de service : Nous remplacerons toutes Instructions de Montage les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 13: Nomenclature Des Pièces

    à la FIGURE 3. Assurez-vous que le support de 90 • Huit dans l’arrière supérieur gauche (G) degrés ne couvre pas les trous de montage ménagés • Six dans l’arrière supérieur droit (H) dans le bord de la base longue (A). 798W — PAGE 2 FR...
  • Página 14 Assurez-vous que le grain des étagères va dans le l’emballage. sens illustré à la figure ci-dessus. Collez ensuite l’arrière inférieur gauche (C) sur l’assemblage des étagères. Tapez ensemble toutes les pièces pour vous assurer qu’elles sont bien adap- tées. 798W — PAGE 3 FR...

Tabla de contenido