Publicidad

Enlaces rápidos

Assembly Instructions
235W
Wide
Console
Base
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
234W
Wide
Bookcase
Base
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any
4/05

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Whittier Wood Products 234W

  • Página 1 Service Policy: We will replace any Base parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Página 2 234W Wide Bookcase Base & 235W Wide Console Base – Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. QTY. QTY. ID Description 234W 235W ID Description 234W 235W E Top .
  • Página 3: Tools Required

    Alder pieces – apply stain to back of base. See FIGURE 2. 235W Wide Console FIG. 1 Base shown in all drawings. 1. Lay out the wood parts in their approximate locations to aid in the identification and assembly. 234W/235W — Page 3...
  • Página 4 • Three in the Left Side Panel (C) • Two in the Right Side Panel (D) • Three in the Right Side Panel (D) • Four in the Base (F) • Four in the Base (F) Page 4 — 234W/235...
  • Página 5 4. Attach the Vertical Divider (A) to the Bottom Shelf (B) with Black Screws (K) (three in 235W and two in 234W) through the predrilled holes in the Bottom Shelf and into the pilot holes in the bottom edge of the Vertical Divider. Make sure the Rafix Cams (I) face down on the Bottom Shelf and the wood trim faces out on the Vertical Divider.
  • Página 6 Vertical Divider and an equal gap from each edge. Attach the Backs (G) to the unit using Screws (M). Make sure the bottom edge of the back is flush with the bottom edge of the bottom shelf and equal distance from the sides. Page 6 — 234W/235...
  • Página 7 Shelf Brackets (R) into the four holes with the flat side down. See FIGURE 8B. Insert the shelf as shown. Secure the shelf to the unit using Screw (S) through the holes in the bottom of the Shelf Bracket into the Shelf. 234W/235W — Page 7...
  • Página 8 Note: If doors are added to unit and the unit is moved, the doors may come out of alignment. To correct, readjust the front levelers first before adjusting door hinges. 10. When you have determined the location for your unit, install the Furniture Tipping Restraint (T). Carefully follow the instructions contained on the package. Page 8 — 234W/235...
  • Página 9 Instrucciones para Armar 234W Base Librero Normas para obtener servicio: Tamaño Reemplaza- remos las piezas que tengan defectos, falten o se Ancho dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 10: Herramientas Necesarias

    234W Base Librero Tamaño Ancho y 235W Base Consola Tamaño Ancho Lista de piezas ANTES DE ENSAMBLAR, verifique que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Cant. Cant. Artículo Descripción...
  • Página 11 FIG. 4 — Center screw not used on 234W base. = La 7. Mida hacia arriba 1/4" desde la parte inferior de la Base (F) y marque esta posición para la Abrazadera Base 234W no usa el tornillo central. para Esquina (N). Fije la Abrazadera para Esquina 4.
  • Página 12 Instructions de Montage 234W Base de Politique de service : Nous remplacerons toutes Large les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter Bibliothèque directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 13: Nomenclature Des Pièces

    234W Base de Large Bibliothèque et 235W Base de Large Console Nomenclature des pièces AVANT DE COMMENCER LE MONTAGE, assurez-vous que les quantités de pièces reçues correspondent à celles de la nomenclature des pièces figurant ci-dessous. Qté Qté Description 234W...
  • Página 14 (F) et marquez l’emplacement pour le positionnement de l’écharpe (N). Fixez une FIG. 4 — Center screw not used on 234W base. = Vis écharpe à la base et à chaque côté au moyen des centrale non utilisée dans la base de 234W.

Este manual también es adecuado para:

235w

Tabla de contenido